Tuesday, February 14, 2023

NASA’s Perseverance Rover Shows Off Collection of Mars Samples

NASA’s Perseverance Rover Shows Off Collection of Mars Samples

NASA's Perseverance Mars rover took a selfie with several of the 10 sample tubes it deposited at a sample depot it is creating within an area of Jezero Crater nicknamed "Three Forks." The image was taken by the WATSON (Wide Angle Topographic Sensor for Operations and eNgineering) camera on the end of the rover's robotic arm.

NASA's Perseverance Mars rover dropped the last of 10 tubes at the "Three Forks" sample depot. 

This photomontage shows each of the sample tubes deposited by NASA’s Perseverance Mars rover at the “Three Forks” sample depot, as viewed by the WATSON camera on the end of the rover’s robotic arm. 
NASA’s Perseverance rover captured this portrait of its recently completed sample depot using its Mastcam-Z camera on Jan. 31, 2023, the 693rd Martian day, or sol, of the mission. Containing 10 samples, the depot is a crucial milestone in the NASA-ESA Mars Sample Return campaign. 
An annotated version of the portrait captured by NASA’s Perseverance shows the location of the 10 sample tubes in the depot. The “Amalik” sample closest to the rover was about 10 feet (3 meters) away; the “Mageik” and “Malay” samples farthest away were approximately 197 feet (60 meters) from the rover. 


NASA’s Perseverance rover captured a portrait of its recently completed sample depot using its Mastcam-Z camera on Jan. 31, 2023, the 693rd Martian day, or sol, of the mission. Containing 10 samples, the depot is a crucial milestone in the NASA-European Space Agency Mars Sample Return campaign. It is humanity’s first collection of samples on another planet. The panorama, stitched together from 368 images that were sent to Earth, captures more than a month of careful placement and mapping of 10 titanium tubes.

Eight of those tubes are filled with rock and regolith (broken rock and dust), while one is an atmospheric sample and one is a “witness” tube. The rover photographed the depot using the Mastcam-Z camera on the top of its mast, or “head,” on Jan. 31, 2023. The color has been adjusted to show the Martian surface approximately as it would look to the human eye.

The depot represents a backup collection of samples that could be recovered in the future by the Mars Sample Return campaign, a joint effort between NASA and European Space Agency (ESA) that aims to bring Mars samples to Earth for closer study. The rover began building the depot on Dec. 21, 2022, precisely spacing the tubes in case they need to be retrieved at a future date.

The primary tubes reside in the belly of Perseverance, which would pass them, along with future samples taken during the mission to a Sample Retrieval Lander as part of the campaign. If anything were to happen to the rover to prevent it from delivering tubes directly to the lander, samples could be retrieved from the depot instead. (Learn more about all 18 samples taken so far.)

Perseverance built the depot at “Three Forks,” a location within Jezero Crater. Billions of years ago, a river flowed into the crater, carrying sediment that formed a steep, fan-shaped delta that the rover will drive up in the months ahead.

While the Martian surface is now cold, dry, and generally inhospitable to life, ancient Mars was likely similar to Earth—and could have supported microbial life, if any ever formed on the Red Planet. The samples Perseverance is collecting could help scientists determine whether life ever left its mark in a place like Jezero Crater.


More About the Mission

A key objective for Perseverance’s mission on Mars is astrobiology, including the search for signs of ancient microbial life. The rover will characterize the planet’s geology and past climate, pave the way for human exploration of the Red Planet, and be the first mission to collect and cache Martian rock and regolith (broken rock and dust).

Subsequent NASA missions, in cooperation with the European Space Agency, would send spacecraft to Mars to collect these sealed samples from the surface and return them to Earth for in-depth analysis.

The Mars 2020 Perseverance mission is part of NASA’s Moon to Mars exploration approach, which includes Artemis missions to the Moon that will help prepare for human exploration of the Red Planet.

JPL, which is managed for NASA by Caltech in Pasadena, California, built and manages operations of the Perseverance rover. Arizona State University leads the operations of the Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras, and in collaboration with the Neils Bohr Institute of the University of Copenhagen on the design, fabrication, and testing of the calibration targets.


Mission Name: Mars 2020

Rover Name: Perseverance

Main Job: Seek signs of ancient life and collect samples of rock and regolith (broken rock and soil) for possible return to Earth.

Mars Helicopter (Ingenuity)

Launch: July 30, 2020    

Landing: Feb. 18, 2021, Jezero Crater, Mars

For more about Perseverance:

mars.nasa.gov/mars2020/


Credit: NASA/JPL-Caltech/ASU/MSSS

Release Date: Feb. 14, 2023


#NASA #ESA #Space #Astronomy #Science #Mars #RedPlanet #Planet #Astrobiology #Geology #PerseveranceRover #Mars2020 #MSR #JezeroCrater #Robotics #Technology #Engineering #JPL #UnitedStates #Europe #MoonToMars #Annotated #STEM #Education

No comments:

Post a Comment